§ 4605. Custom manufacturing.

(a)

General standards:

(1)

All activities comprising the manufacturing process, other than loading and unloading, shall be conducted within an enclosed building.

(2)

No exterior odor, dust, noise, or other objectionable impacts shall be produced as a result of the use.

(3)

The outside storage of goods, supplies, or materials must be placed in the rear yard. Outside storage areas shall not exceed fifteen (15) percent of the total area of the site.

(4)

Where the site is adjacent to a residential district, hours of operation may be restricted.

(b)

Additional standards in the RR1 and RR2 zoning districts:

(1)

A custom manufacturing establishment shall meet all the requirements for a principle structure.

(2)

Maximum square footage for a custom manufacturing establishment: Three thousand (3,000) square feet.

(3)

When adjoining a residential use type on an adjoining lot, a type C buffer yard shall be provided.

(4)

The site shall front directly on and have direct access to a publicly owned and maintained street.

(5)

The custom manufacturing establishment shall be associated with a single-family dwelling.

(6)

Minimum lot size: Three (3) acres.

(c)

Standards in the GC zoning district: Parking shall be located behind the front line of the principal building. Town Council may grant a special exception to this requirement as authorized by Section 1112.

(Ord. No. 1308, § 57, 8-13-02; Ord. No. 1680, § 1, 5-14-13)

(Ord. No. 1308, § 57, 8-13-02; Ord. No. 1680, § 1, 5-14-13)